|
|
| MINI-VALVES |
- Compact size valve built for maximum durability and robust performance in the toughest applications
- Certain models 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 100 Series hard seat valves have a maximum pressure of 10,000 psi for stainless steel and steel models; 6,000 psi for brass
- Available in electroless nickel plated steel, electropolished stainless steel, and brass
- Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional
- All stem threads are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
|
|
NEEDLE VALVES
- Many Valves 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 6000 and 10,000 psi pressure ratings (@ 200°F maximum)
- Blow-out proof stem provides a secondary stem seal in the full open position
- On Non-adjustable packing valves, Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional
- All stem threads are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Bonnet lock pin to prevent accidental loosening
- Vinyl bonnet and stem dust cap
- Optional panel mount bonnet and panel nuts
MULTI-PORT VALVES
- These valves reduce the number of gauge and other instrument connections to permanent piping installations, decreasing possible leak paths
- Optional bleed plugs further allow pressure to be bled off without disturbing the permanent piping installation
- 100% leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
- 6000 and 10,000 psi pressure rating (@ 200°F maximum)
- Blow-out proof stem provides a secondary stem seal in the full open position
- On non-adjustable packing valves, Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling; Teflon® or Grafoil® packing optional
- All stem threads are 316 stainless steel
- All stem threads are rolled for strength and ease of operation
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Bonnet lock pin to prevent accidental loosening
- Vinyl bonnet and stem dust cap
- 0.187 inch orifice size
- Optional panel mount bonnet and panel nuts
