FLOW METERS

Mass Flow Meters and Controllers Multiple process measurements in one device to reduce the need for other measurement devices. Response speed can be adjusted by the user to suit the application Multiple analog & digital outputs to make communicating with the device easier and less costly. 100:1 Turndown ratio allows the flow meter to measure flow at 1/100th of its full scale rating 30-Gas Select on all units reduces inventory requirements The max flow rate for the mass flow meter does not change, regardless of gas! “Tare” feature allows the user to zero the unit at any time Customizable units of measure for added ease of use Optional Remote Display allows for panel mount of the display with full push-button control in embedded applications

SEGMENTAL WEDGE METERS

The segmental wedge element is a device, specifically designed for use on slurries, corrosive/ erosive fluids, viscous liquids and high temperature applications. In is available for pipe sizes > ½ in. The unique flow restriction is designed to last the life of the installation, without requiring repair or replacement, and without experiencing any degradation in accuracy. Read More

CONE METERS

Our Cone Meters offer a wide range of applications including Natural Gas Custody Transfer Measurements, Wet Gas and Steam, White Oil Blending, Wellhead and Separator Measurements and more. Read More

ORIFICE PLATES & VENTURIS

The orifice meter consists of a flat orifice plate with a circular hole drilled in it. There is a pressure tap upstream from the orifice plate and another just downstream. There are in general three methods of placing the taps. The coefficient of the meter depends upon the position of taps. Read More

ROTAMETERS – VARIABLE AREA

Simple and versatile, variable area flow meters measure the flow of liquids and gases. Our rotameters utilize a tapered hole down the center of the flow meter body. The flow indicator, or float, is contained within this tapered hole. As flow passes through the flow meter, this float will move up and down in the tapered hole. This movement serves to indicate the measured flow rate. Read More

TURBINE METERS

The GPI Stainless Steel Flow Meter line has a proven track record in the industrial market. GPI Stainless Steel Flow Meters are rugged and dependable. Use stainless steel flow meters for most chemicals: Ammonium, Plating Solutions and Fuel products. Read More

CORIOLIS METERS

Coriolis Meters offer volume, mass, density and temperature measurements from a single device and serve a wide range of applications. Read More