Channel – Tray- Tubing Clips – Angle

PUNCHED CHANNEL 2” FLANGE ALUMINUM • GALVANIZED • STAINLESS Round hole for 1/2” bolts Square hole for 1/4” carriage Bolt or machine screw

Punched Angle: A pre-engineered protective support system for: Single Tube • Multi-Tube • Electronic Cable

• Round hole for 1/2” bolts
• Square hole for 1/4” carriage
• Bolt or machine screw

Raceway: A pre-engineered protective support system for: Single Tube • Multi-Tube • Electronic Cable

PROTECT-O-WAY is a pre-engineered protective support system for single tube, multi-tube, electronic and fiber-optic cable. It offers easy, organized, cost efficient installation into power generation and petrochemical plants, water and sewage systems, paper mills or anywhere instrument tubing is installed. The system includes straight sections with covers and a complete line of complementing fittings together with an array of various styles of clamping mechanisms.

Channels are 16’-0” long and 7/8” deep, they come complete with connectors, nuts and bolts and are punched every two (2) feet to accommodate carriage bolts with hold-down clamps or j-bolts. Available in three different materials-6063-T6 aluminum, mill-galvanized steel and stainless steel.

PROTECT-O-WAY offers a customized system to satisfy your specific application.

Fittings for Raceway

The various Protect-O-Way clamping devices provide complete flexibility in the use of varying numbers and sizes of cables and tubing.

STAIN LESS STEEL PUSH CLIPS of for easy installation and firm tube containment by quickly pressing into place at two foot intervals.

The TUBE CLIP PLATE has earned industry approval for a secure clamping action which requires the least field ef fort of any other clamping device. Clip plates are pre-installed at 24” intervals in the supporting channel ready for field use.

Mounting holes at two-foot intervals along the length of the channel permit use of either carriage bolt, hold-down clamp assemblies or J-bolt, hex-nut assemblies. The HOLD-DOWN CLAMP assembly may be used for either single or multiple levels of single tube, electronic or multi-tube cable while the J-BOLT ASSEMBLY may be used for attaching large diameter cable or multitube.